随着我国城市化进程日益加快,路沿石模具的使用日趋频繁,毋庸置疑,模具行业前景非常可观, 产品用途遍及市政、建筑、林园、小区建筑等.质量可靠,技术领先.
With the rapid development of urbanization in China, the use of molds along the road is becoming more and more frequent. There is no doubt that the prospect of mold industry is very considerable. The products are widely used in municipal, construction, forest park, community building, etc. the quality is reliable and the technology is leading
路沿石模具加工设备采用先进的集成化系统,传动精密,运行稳定高效.备有油冷却装置,适应于不同环境温度条件下生产.
The advanced integrated system is adopted in the mould processing equipment of curbstone, with precise transmission, stable and efficient operation. Equipped with oil cooling device, it is suitable for production under different ambient temperature conditions
路沿石模具在使用一段时间后,滤清器壳内底部会残留很多杂质,这会对模具平时作业带来很大影响,我们平时使用时一定要多加留心,既然会残留很多杂质,我们应该怎么清洗呢
After using the curbstone mold for a period of time, there will be a lot of impurities left at the bottom of the filter housing, which will have a great impact on the normal operation of the mold. We must pay more attention to it when we use it. Since there will be a lot of impurities left, how should we clean it
模具系统在清洗时必须要使用与系统型号符合的液压油,液压油的温度****在45-80摄氏度,用大流量尽可能的将系统中的残留杂志冲走,路沿石模具生产系统比较特殊,要清洗三次以上,每次在清洗完之后趁油热将全部放入液压系统。
When cleaning the mold system, the hydraulic oil that is consistent with the model of the system must be used. The temperature of the hydraulic oil should be 45-80 ℃, and the residual magazines in the system should be washed away with a large flow as much as possible. The production system of the road stone mold is special, and it should be cleaned for more than three times. After each cleaning, put all of them into the hydraulic system while the oil is hot.
我厂有先进的生产设备和工艺,时刻为客户提供****的产品和满意的服务，我厂不但注重质量,更狠抓管理,为客户提供一条龙式的服务,从客户洽谈到模具设计,一直到交付使用,每个环节都有专业的人员负责,让客户更明朗
Our factory has advanced production equipment and technology, and always provides customers with high-quality products and satisfactory services. Our factory not only pays attention to quality, but also pays more attention to management, and provides customers with one-stop service. From customer negotiation to mold design, to delivery and use, every link is in the charge of professional personnel to make customers more clear
